A naturally occurring polymer found in wood that acts like glue.
LignoBIND can be used on the following surfaces:
- Cities, counties and haul roads
- Feed lots
- Construction areas
- Tree / Flowers / Nurseries
- Forest / timber haul roads
In preparation for applying LignoBIND as a dust suppressant,
roads should first be re-crowned with a grader. Pre-wetting the road is recommended for best results.
LignoBIND can also be applied without pre-wetting if water is not accessible,
although results will vary depending on moisture content of the road base.
Blade mixing followed by compaction into top 100mm of road surface will yield best results.
Application rates for a topical application are typically 2.5 to 5% solution
@ 1 to 1.5 litres per square meter.
20L Container, 205L Drum, 1000L IBC